Jaguar / Landrover Cupholder
Dock for Samsung USB-C phone
I have produced all the parts required by 3D printing to hold the Samsung USB-C plug in the corect position and enable the iPhone to connect to the cable. The kit includes all the fixing materials and support blocks, all you will need is a drill, either Ø 13mm or Ø 1/2" to make a hole in the bottom of the cupholder. The kit contains a drill guide so the hole is in the correct position to make the perfect result.
Suitable Samsung phones:-
If your phone fits into the support guides in the cupholder and the connector has a USB-C connector, then this dock kit should work. It has been designed to accommadate phones that are in a case, so if the phone and case can be slotted into cupholder this will work. Please contact me of you need advice, using the email link below.
1/ Remove cupholder from vehicle.
2/ Using either Ø 13mm or Ø 1/2" drill bit and the blie drilling guide provided, locate it in position shown in Figure 1.
3/ While pushing guide into wedge feature, carefully drill the hole making sure the surface under cupholder isn't obstructed to prevent damage.
4/ Make sure all loose materal is removed and the area around the hole is clean and dry.
1/ Push the cable plug through the hole you just drilled Figure 2.
2/ Depending how well the blocks grip your particular plug you can place a small piece of double sided tape on one side or if you prefer both sides of plug as shown in Figure 4.
3/ Peal off backing material and place plug in one of the blocks Figure 5.
4/ Assemble the 2 halves of the black mounting blocks and push together as shown in Figure 6.
5/ While gripping the 2 halves together, apply the large shaped doubled sided tape to bottom of the 2 blocks Figure 8.
6/ Remove double sided tape backing material and carefully slide the assembly right into the wedge feature, then slide it downwards and push firmly into the base of cupholder Figure 9.
7/ Slide youe phone into cupholder and check it all fits Figure11.
1/ The kit is suitable for the following models.
Jaguar I-PACE & E-PACE and Landrover Discovery
1/ The complete kit of plastic parts and double sided tape is £20 including UK delivery. For European customers including delivery €28. Payment is by PayPal using the email address email@example.com.
For further details, questions and contact address please email me.